POR-15 Floor Armor Basic Kit - Floor Coating |
![]() ![]() |
POR-15 Floor Armor Basic Kit - Floor Coating |
Apr 10 2007, 07:53 PM
Post
#1
|
|
![]() POR-15 Support ![]() ![]() ![]() Group: Root Admin Posts: 48 Joined: 8-April 07 From: Mount Vernon, Texas Member No.: 1 |
NOW, Seal your floor permanently with all-new Floor-Armor floor Painting kits. from the makers of POR-15 [*]KITS HAVE EVERYTHING TO DO THE JOB YOURSELF. [*]Better preparation system equals better results ! Competitive products require using either muriatic acid or flooding floors with water for surface preparation. This results in locking in moisture which causes deterioration of the concrete. With Floor Armor™, there is no need to endure the fumes of muriatic acid or flooding the floor. The Floor Armor™ dry system of surface preparation GUARANTEES results. [*]Solvent based low voc urethane technology outperforms water-based epoxies . Water-based coatings are not proven for long term protection. Floor Armor™ uses proven POR-15® urethane technology. [*]Floor ARMOR™ IS engineered to be Resistant to chemicals, abrasion, heat and impact. Epoxy coatings on the other hand are not only very brittle but extremely porous therefore failing much earlier in comparison. [*]No hot tire pEEL ups ! Some epoxy floor kits come with plastic tire “pads” because of poor heat resistance. Not Floor Armor ™ ! [*]COLOR CHIPS AVAILABLE TO CREATE your OWN LOOK AND/OR HIDE IMPERFECTIONS ON FLOOR SURFACE . Color chips can also be purchased individually for additional customization. Decorative chips also pull the eye away from the inherent imperfections in concrete floors making a rough surface look new and smooth. [*]5 FANTASTIC COLORS. Light Gray, Dark Gray, Tan, Beige and White. [*]OPTIONAL WATER CLEAR & EXTREMELY DURABLE CLEARCOAT. Excellent resistance to chemicals, oil and salts. Also perfectly seals in decorative vinyl chips. Satisfaction Guaranteed! Guaranteed not to chip, crack or peel. Basic Floor Kit 1 ½ Car Garage [*] Topcoat (part A) [*] Crosslink catalyst (part [*] Non-slip aggregate [*] ¼” roller – for topcoat application [*] ½” roller – for basecoat application [*] 9” birdcage roller frame [*] 2 ½” chip brush – for trim and edge work [*] Grease & Oil remover [*] Stir Stick [*] 2 pairs of gloves * Kit will coat over 400 square feet with two covering coats of Floor Armor™ -------------------- |
|
|
|
![]() ![]() |
|
Lo-Fi Version | Time is now: 13th October 2008 - 09:03 AM |